Ask an expert a tech question:

Choose your expert :

Jay Roeder - More Horses

Mike Stewart - Tranny Tech

Check Out That Chassis
- Scott Weney

Fuel For Thought
- Dave Koehler

Your name:

Your location:

Your email:

Your Question may or may not be chosen to be published on this page.


Do you want to subscribe to our FREE email newsletter?

Yes No

I have a 1998 Pontiac Trans Am with a bone stock LS1 motor.   I am going to start building up the motor and turn it into a drag car.  I want to start with the exaust but don't now what brand or setups to use.  There are alot of different brands out there.

If you could help me with picking a brand and what I should buy that would help alot.

Max, New Jersey


Thanks for the question. Hedman Hedders (www.hedman.com) has what you need. Part #66534 is a full length, stepped tube design with 1 1/2" to 1 5/8" primaries and a 3 in. collector.

These will provide great torque along with top end power. If you go too large you will sacrifice too much torque for a slight increase ,at a higher rpm, in horsepower.

Hope this helps,