AEM Releases its High-Flow, In-Tank Fuel Pump for EFI Vehicles

AEM High Flow Fuel Pump Features:

  1. Designed for high output naturally aspirated and forced induction EFI vehicles
  2. In tank design
  3. Tested to flow 320 lph @ 43 PSI
  4. 39mm diameter fits most applications
  5. Offset inlet design eases installation
  6. Each pump individually tested
  7. For gasoline vehicles
  8. Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead

AEM Performance Electronics has released its High Flow in-tank Fuel Pump for high performance naturally aspirated and forced induction EFI vehicles (Part #50-1000). It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.

The AEM High Flow Fuel Pump flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Flow curves from 35 to 90 PSI and current draw vs. fuel pressure charts are available at www.aemelectronics.com.

The AEM High Flow Fuel Pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every pump is tested to flow 320 lph at 43 PSI before it is packaged for sale.

S&W RACE CARS IS RAISING THE BAR

S&W Race Cars & Components has introduced a new and extensive line of 4-Point ‘Street Bars,’ made exclusively for the serious highway enthusiast.

That’s right, in addition to their premium line of competition legal roll bars and roll cages, S&W now offers over 100 models of direct fit 4-Point Weld-In ‘Street Bars.’ They are designed to enhance your favorite Domestic or Import Car, Truck or SUV! Crafted in the USA, at S&W’s Spring City, PA facility, each kit is made of 1-3/4” Diam. X 0.134” Wall EWS Mild Steel Tubing. Including: Main Hoop, (2) Pre-notched Back Bars, (1) Pre-notched Seat Cross Member and (4) 1/8” Floor Plates. Also, optional Dropped Side Bars and padding are available. Most models: $139.95 (specify make & model when ordering)

“We are listening,” said S&W’s Jill Canuso. “The new ‘Street Bar’ product line fills a customer need. Everyone will be impressed with the perfect fit, outstanding performance and reasonable price.”

S&W has also released a Bolt-In ‘Street Bar’ for 93’-02’ Camaro/Firebird and 79’-93’ Mustang owners. The Bolt-In models are sold as a 4-Point or 6-Point kit and can be installed or removed easily. Both feature a durable Black Powder Coat finish and installation hardware. 6-Point models also include (2) swing out side bars and a seat cross member.  S&W weld-in and bolt-in street bars are not approved for competition use.

For more information visit www.swracecars.com or call (800) 523-3353.