« PREV. PAGE NEXT PAGE »

It's New to Us!

392 rockers from Reid

Made from billet 4340 chrome moly steel, heat treated and double tempered, the new arms boast the some of the same design features of the now race proven 426 arms being used by some of the top professional teams that were first released in early 2008.

  1. An “I-beam” structure, with full time oiling to the pushrod through the adjuster.
  2. Bronze bushing and an electroless nickel coating to resist rust and the corrosive effects of nitromethane.

The new “Competition” assembly has oil feeding through both intake and exhaust shafts, with a provision for additional oiling to the exhaust valves and springs through the stands, the shafts are made from 4130 chrome moly steel, .250 wall tubing and are centerless ground, hard chrome plated then ground to size, creating a smooth surface to provide maximum life and durability, both intake and exhaust rocker arms have roller tips. All Reid rockers and stands are made in the U.S.A. in our facility.

For more information go to www.reidmachine.com or call 951-245-8850.

COMP Cams Elite Drag Race Dual Valve Springs

Unlike any existing spring, COMP Cams Drag Race Dual Valve Springs feature a new proprietary cutting-edge progressive pitch coiling process that greatly improves durability and ensures safe spring life beyond traditional extreme-duty expectations.

COMP Cams Elite Drag Race Dual Valve Springs are smaller in diameter and feature much higher natural frequencies than other aftermarket springs. These Dual Valve Springs are coiled with a revolutionarily new process that enhances durability by designing and manufacturing the outer spring's interface with the inner spring to be a precision tolerance engineered match. The Elite Drag Race Dual Valve Springs use a smaller, lighter retainer engineered with a newly developed and specially formulated extreme duty tool steel. This exclusive design using lighter steel retainers increases the longevity in extreme conditions, making them perfect for professional drag racing applications.

Exclusive clean wire sourcing and precision micro finishing ensure inclusion and fissure-free material. Every hand selected, hand matched COMP Cams Drag Race Dual Valve Spring is matched with proprietary tolerance fitment between inner and outer springs. For more information about the COMP Cams Drag Race Dual Valve Springs or any other COMP Cams product, call 1-800-999-0853, or visit www.compcams.com.

MATCO INFINIUM CORDLESS TOOLS

Matco offers a lithium universal smart charger as well as a 10.8V quick charger for its Infinium lineup, which features three voltage families: the 18 Volt family includes a 1/2" impact wrench, axle grinder and power shear; the 14.4 Volt family has a 3/8" impact wrench, drill driver and grease gun; and the 10.8 Volt family includes a mini polisher, drill driver, 1/4" impact wrench and impact/screwdriver combo.  Products can be ordered as a kit (tool, battery and charger) or a la carte.

The Infinium 18V 1/2" Impact Wrench is the line's flagship product.  Featuring 425 ft. lbs. of working torque and weighing less than 7 lbs., this impact wrench is the ultimate combination of convenience, power and utility.  Matco also exclusively offers the industry a 10.8V 1/4" Impact Wrench that features 55 ft. lbs. of torque, a variable speed trigger for greater control and a compact size to easily access hard-to-reach areas.

All the Infinium tools come with lithium ion batteries, which boast short charge times - cycles complete within an hour on a fully discharged battery - and no memory build up so they can be charged or used without permanent capacity loss.  In addition, technicians can easily identify remaining charge at the push of a button fuel gauge, which helps them effectively manage their tool use.  Matco's 10.8V line up has a 1.5Ah lithium ion battery, while the 14.4V and 18V lines come with 3.0Ah batteries.

For more information, contact Matco at 866.289.8665; write to 4403 Allen Rd., Stow, Ohio 44224; or visit www.matcotools.com.

« PREV. PAGE NEXT PAGE »