BMW 2.8L 3.0L & 3.2L Rod Bolt Kit

ARP - The world leader in fastener technology has just released a new Pro Series ARP2000 connecting rod bolt kit for BMW 2.8L (M52EURO), 3.0L (S50US) and 3.2L (S52US) inline 6 cylinder applications.

Part No. 201-6201 includes a set of twelve ARP2000 Pro Series rod bolts that are rated at 220,000 psi and replace the BMW factory bolt part no#11241739728. The ARP2000 material has considerably better fatigue life and the bolts are reuseable as compared to the OEM Torque To Yield (TTY) rod bolts which must be replaced after each use. Optimum design, enhanced reliability and increased strength are the main attributes of ARP’s Pro Series connecting rod bolts.

ARP products are available worldwide through local distributors.

Quick Fuel Technology Throttle Return Spring Kit

When you are traveling over 100-mph at the end of the ¼-mile be sure your throttle return springs are going to do their job. The Quick Fuel Technology Throttle Return Spring kit for 4150-style carbs (#49-3) will ensure that your throttle plates close when it's most important.

Quick Fuel Technology (QFT) engineered this kit to eliminate the possibility of a stuck throttle. The geometrically correct return spring system will never hang up and never fail, keeping you and your racecar safe. QFT's lightened stainless steel return spring bracket mounts to a main body carb stud, providing a secure attachment preventing the return spring bracket from rotating out of position.

The return spring and bracket are racer "friendly" and do not interfere with fuel bowl or metering block removal. The bracket and springs allow access to the idle mixture screws too. Dual stainless steel springs, coupled with the throttle lever bushing, provide firm and smooth throttle feel and meet the dual return spring safety requirements of most sanctioning bodies.

For more information, contact the fuel delivery experts at: Quick Fuel Technology, 129 Dishman Lane, Bowling Green, KY 42101. Phone (270) 793-0900. Fax (270) 793-0951. Visit QFT on the web at: quickfueltechnology.com, or e-mail quickfuel@earthlink.net.

Injector Dynamics 2000 cc/min Fuel Injectors

Injector Dynamics, the leader in after market fuel injectors and testing, is proud to announce the release and upcoming availability of its ID2000 Fuel Injectors. The ID2000 flows 2200 cc/min (210 lbs/hr) at 43.5 PSI fuel pressure and features a narrow body design with an aluminum "Top Hat" which allows it to fit where a standard EV1 style injector goes. The injector is a high impedance design which makes it unique in the high flow fuel injection market. Additionally this injector has excellent response using pressures as high as 130 psi which results in a flow rate of 3700 cc/min (350 lbs/hr) 

As with all Injector Dynamics injectors, the ID2000 is sourced in batches of at least 200 and then rigorously characterized using Injector Dynamics unique industry leading testing equipment. The injectors are then closely matched based on not only flow rate but dead time. By using this method Injector Dynamics has become the ONLY injector supplier on the market who can supply injectors which are characterized based on how they will be used - dynamically in an engine. 

Injector Dynamics offers its injectors through our west coast dealer Shane Tecklenburg of ST Consulting or via the Injector Dynamics website at www.injectordynamics.com. For questions regarding availability of the ID2000 or any other Injector Dynamics products please call 714-318-5845 or email shaneteck@yahoo.com.