FAST Air/Fuel Meter RPM Module
The FAST Air/Fuel Meter RPM Module is an upgrade kit that lets you monitor and record your engine’s rpm and is fully compatible with any FAST Air/Fuel Meter. It installs with a quick firmware update to your meter, and the rpm module plugs in-line with your existing O2 sensor harness. The rpm pick-up is a unique inductive pick-up design that eliminates any wire cutting to get your rpm signal.
The FAST Air/Fuel Meter RPM Module comes with everything you need, including the installation CD, communications cable, USB cable adapter, power source, rpm module, clip-on inductive pick-up and full instructions to get you up and running in no time.
For more information about the FAST Air/Fuel Meter RPM Module, or any other FAST product, visit them online at www.fuelairspark.com.
Mittler Bros. Machine & Tool Model 200 24” Power Bead Roller
Miller Bros’ fabricated frame power bead rollers, which have become the standard others are judged by for more than eleven years, are being updated to a new billet designfor 2008. This billet design will initially be available in the 24” model with the 36” model following. This billet design is based on proven welded frame technology. Using their CNC capabilities enables them to produce a beautiful precision machined product at a price comparable to the welded construction. Besides the great new looks, other enhancements have been made that make this machine even more user friendly and a must have for your shop. An early December 2007 roll out is what’s planned.
Flame-Thrower Ford FE 352-428 Billet Distributor
This distributor allows you to upgrade your outdated points or stock electronic system with a performance proven distributor that features the patented Ignitor II electronic ignition module and a CNC machined 6061 T-6 polished billet housing and deck.
PerTronix electronics is also compatible with any inductive ignition system coil, but high RPM performance can be improved when used with their low resistant (0.6 ohm) Flame-Thrower II coil.
Additional features include a tempered shaft with low torsion displacement; an upper ball bearing and lower self-lubricating oil impregnated copper powder metal bushing and a durable machined heat-treated gear. Distributors come with a factory set performance curve, a mechanical advance limiting adjustment and high dielectric strength cap and rotor. These distributors are also available in a non-vacuum configuration with either a black or red cap.
For more information contact your local performance or marine retailer, or call PerTronix at 909-599-5955.
Recent Stories
