PipeMaster Welders Tool for Contour Fits
The most difficult step when building anything from tubing is precision mating the tube angles to ensure a good, strong weld. PipeMaster is the most accurate and easy to use hand tool for the layout of difficult pipe end cuts. It eliminates all of the guesswork and will provide you with the perfect shape to cut every time!
The PipeMaster simply slides over the pipe and the pins are pressed down to match the contour shape of the adjoining tube. The closer the housing is to the joint the more accurate the pins will be. Next, slide back the PipeMaster far enough to trace the shape made by the pins. Now it's time to cut and fit. The time saved by eliminating re-cutting, grinding and waste makes this tool worth its weight in gold.
For more information on PipeMaster visit www.pipemastertools.com.
SOCKET ASSIST
We’ve all been frustrated with a bolt located in such a tight space (header bolt!) you can’t possibly get a ratchet on it. Not a problem anymore with Proform Parts Socket Assist. Each patented Socket Assist has a 12-point end to facilitate finger turning until snug. Also the Socket Assist allows using a combination wrench that’s equal to or smaller than the socket drive size. They are available in 1/4x1/4, 1/4x3/8 and 3/8x3/8-inch sizes and are a must have for your tool crib.
Socket Assist allows a large spark plug socket with a 3/8-inch drive opening to be turned by a small 1/4-inch open end or ratchet wrench. The tools non-12-point end has a 1/4 or 3/8-inch square drive with a spring-loaded detent ball that secures the socket. All three sizes are included in the self-sealing blister pack, and Proform now has the new Clipstrip for easy handling and POP display box for retail sales. To preview all they offer, visit www.proformparts.com.
New FAST Dual-Sync Distributors
The FAST Dual-Sync Distributors fit most popular V8 domestic engine applications and drop into the standard factory distributor openings without modification.
To install, simply set the engine at TDC, drop-in the distributor and turn the base until the LEDs light-up, and then simply lock it down, and your engine is properly timed.
FAST Dual-Sync Distributors come complete with instructions and the proper standard with heavy-duty cast iron gears; upgraded polymer and bronze gears are also available. Before installation, check with your camshaft manufacturer to determine which distributor gear material is compatible with your specific camshaft core. For more information about the FAST Dual-Sync Distributors visit them online at www.fuelairspark.com.
Rockers That Fit
T&D Machine Products, manufacturers of the finest in shaft-mount rocker arm technology, has made available a single shaft system for the new Edelbrock Victor 440 cylinder head. Wrapped around a 3/4”heat treated steel (8620) shaft, these rockers contain a pair of caged needle roller bearings. They cure all valvetrain and pushrod geometry problems with the proper rocker arm offsets -- 0.650 intake and 0.120 exhaust. The adjusters have a hardened steel cup and large 3/16” hex and 12-point nut for trouble free adjustment. Oiling is through head, and more precise ball/ball pushrods are mandatory. Also, T&D offers this Mopar set with ratios from 1.5 to 1.7.
Available through speed shops, engine builders or direct from T&D.
For more information, check out www.tdmach.com.
